Enantiomeric determination of econazole and sulconazole by electrokinetic chromatography using hydroxypropyl-ß-cyclodextrin combined with ionic liquids based on L-lysine and L-glutamic acid.

Two analytical methodologies based on the combined use of hydroxypropyl-ß-cyclodextrin and two different amino acid-based chiral ionic liquids (tetrabutylammonium-L-lysine or tetrabutylammonium-L-glutamic acid) in electrokinetic chromatography were developed in this work to perform the enantioselective determination of econazole and sulconazole in pharmaceutical formulations. The influence of different experimental variables such as buffer concentration, applied voltage, nature and concentration of the ionic liquid, temperature and injection time, on the enantiomeric separation was investigated. The combination of hydroxypropyl-ß-cyclodextrin and tetrabutylammonium-L-lysine under the optimized conditions enabled to achieve the enantiomeric determination of both drugs with high enantiomeric resolution (3.5 for econazole and 2.4 for sulconazole). The analytical characteristics of the developed methodologies were evaluated in terms of linearity, precision, LOD, LOQ and recovery showing good performance for the determination of both drugs which were successfully quantitated in pharmaceutical formulations. This work reports the first analytical methodology enabling the enantiomeric determination of sulconazole in pharmaceutical formulations.

Resolution and Quantitation of Triamcinolone Acetonide and Its Coformulated Drug in the Presence of Its Impurities and Degradation Products by HPTLC and HPLC.

Two specific, sensitive, and precise stability-indicating chromatographic methods have been developed for the determination of triamcinolone acetonide (TMC) and its coformulated drug, econazole nitrate (ECZ), in the presence of TMC impurities and degradation products. The first method was based on HPTLC-spectrodensitometry in which resolution and quantitation was achieved by using silica gel 60 F254 HPTLC plates and an ethyl acetate-tetrahydrofuran-ammonia mobile phase (10.0 + 7.0 + 0.1, v/v/v). The second method was a reversed-phase HPLC method in which separation was achieved using an acetonitrile-methanol-0.05 M potassium dihydrogen phosphate mobile phase, pH 3.0 (25.0 + 15.0 + 60.0, v/v/v). In both methods, the separated components were detected at 225 nm. Validation of both methods was conducted in compliance with International Conference on Harmonization (ICH) guidelines, and system suitability was confirmed. The linearity ranges were 0.20-28.00 and 0.50-55.00 µg/band for TMC and ECZ by HPTLC, whereas for HPLC, the range was 0.05-30.00 and 1.00-40.00 µg/mL for both drugs, respectively. The methods were successfully applied for the analysis of a pharmaceutical formulation and were compared with the reported method with no significant difference.

Selective extraction of antimycotic drugs from sludge samples using matrix solid-phase dispersion followed by on-line clean-up.

An effective and selective, modular sample preparation method for the extraction of eight antimycotic drugs, belonging to three different chemical classes, from digested sludge samples is proposed. To this end, matrix solid-phase dispersion (MSPD) was on-line connected with a cationic exchanger solid-phase extraction (SPE) cartridge. Analytes were extracted from the MSPD syringe, which contained the freeze-dried sludge sample dispersed with C18 plus a clean-up layer of primary and secondary amine (PSA) sorbent, with 10 mL of methanol. This extract flowed also through the SPE cartridge, where target compounds remained trapped while neutral interferences are released. After discarding the MSPD syringe, analytes were recovered with 10 mL of methanol (0.5% in NH3) before LC-MS/MS determination using a hybrid quadrupole time-of-flight (QTOF) mass spectrometer furnished with an electrospray ionization (ESI) source. In comparison with previously published sample preparation methodologies, the developed approach greatly simplifies sample handling and reduces attenuation of ESI ionization for sample extracts when compared to standard solutions. The obtained absolute recoveries ranged between 70 and 118%, and the limits of quantification (LOQs) of the method varied between 5 and 8 ng g(-1). Four antimycotic drugs were ubiquitous in urban sludge samples, with maximum average concentrations (above 400 ng g(-1)) corresponding to clotrimazole (CTZ). The screening capabilities of the LC-QTOF-MS system demonstrated that the developed modular extraction and purification methodology might be useful for the selective extraction of other basic drugs (e.g., sertraline, amitryptiline, and amiodarone) from sludge.

Cyclodextrin-modified micellar electrokinetic chromatography for enantioseparations.

The separation of enantiomers is one of the important fields of modern analytical chemistry, especially for agrochemical and pharmaceutical products because the stereochemistry has a significant influence on the biological activities of compounds. Cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) has become an important capillary electrophoresis mode for enantioseparations. Here, we describe an example of a CD-MEKC method using hydroxypropyl-γ-cyclodextrin as chiral selector and sodium dodecyl sulfate as micellar solution for enantioseparation of triazole fungicides and the drug econazole.

Distribution, behavior and fate of azole antifungals during mechanical, biological, and chemical treatments in sewage treatment plants in China.

Residue of azole antifungals in the environment is of concern due to the environmental risks and persistence. Distribution, behavior, and fate of frequently used azole antifungal pharmaceuticals were investigated in wastewater at two sewage treatment plants (STPs) in China. Fluconazole, clotrimazole, econazole, ketoconazole, and miconazole were constantly detected at 1-1834 ng L(-1) in the wastewater. The latter four were also ubiquitously detected in sewage sludge. Fluconazole passed through treatment in the STPs and largely remained in the final effluent. On the contrary, biotransformation and sorption to sludge occurred to the other azoles. Ketoconazole was more readily bio-transformed, whereas clotrimazole, econazole, and miconazole were more likely to be adsorbed onto and persisted in sewage sludge. Lipophilicity plays the governing role on adsorption. The highest concentrations in the raw wastewater were observed in winter for the azole pharmaceuticals except for fluconazole. The seasonal difference was smoothed out after treatment in the STPs.

Chiral separation of econazole using micellar electrokinetic chromatography with hydroxypropyl-gamma-cyclodextrin.

A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) method with hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD) as chiral selector for the enantiomeric separation of econazole is reported. Enantioseparation of econazole was successfully achieved by the optimized CD-MEKC system containing 40mM HP-gamma-CD, 50mM SDS and 20mM phosphate buffer (pH 8) solution with an analysis time of less than 9min. Calibration curves were linear for the two stereoisomers of econazole (r(2)>0.998). Good repeatabilities in the migration time, peak area and peak height were obtained in terms of RSD% ranging from 0.30 to 7.67%. Combination of solid-phase extraction (SPE) procedure using diol column and the CD-MEKC method was successfully applied to the determination of econazole in a formulated cream sample.

Rapid analysis of aerosol drugs using nano extractive electrospray ionization tandem mass spectrometry.

Aerosol drugs dominate a significant share of pharmaceutical preparations on the market. A novel sensitive method utilizing nano extractive electrospray ionization mass spectrometry (nanoEESI-MS) has been developed for the rapid analysis of aerosol drug samples with quantitative information. Without any sample pretreatment, aerosol drugs were manually sprayed into the primary ion plume created by a nano electrospray emitter for direct ionization under ambient conditions. The analyte ions of interest were guided into an ion trap mass spectrometer for tandem mass analysis. The active ingredients of various aerosol drugs, such as econazole nitrate, beclomethasone dipropionate, binary mixture of methyl salicylate and diphenhydramine, terbutaline, and salbutamol, were rapidly detected using nanoEESI-MS. A single sample analysis could be completed within 1.2 s. Tandem mass spectrometry was used to confirm the identification of important compounds in each aerosol drug sample. Reasonable relative standard deviation (RSD = 6.39%, n = 13) and acceptable sensitivity (10 ppt, 100 muL) were found for the salbutamol aerosol sample, which suggests that nanoEESI-MS has the quantitative capacity for analyzing complex pharmaceutical samples. This method was further extended to study the thermal decomposition process of salbutamol, showing that the degradation kinetics of salbutamol can be conveniently tracked. Our data demonstrate that nanoEESI tandem mass spectrometry is a fast and sensitive technique for the analysis of aerosol drug preparations, showing promising applications in pharmacology studies and in situ analysis of aerosol drugs on the market.

Screening of antimycotics in Swedish sewage treatment plants--waters and sludge.

Concentrations of six pharmaceutical antimycotics were determined in the sewage water, final effluent and sludge of five Swedish sewage treatment plants (STPs) by solid phase extraction, liquid/solid extraction, and liquid chromatography-electrospray tandem mass spectrometry. The antimycotics were quantified by internal standard calibration. The results were used to estimate national flows that were compared to predictions based on sales figures. Fluconazole was the only one of the six investigated antimycotics that was detected (at concentrations ranging from 90 to 140 ng L(-1)) in both raw sewage water and final effluent. Negligible amounts of this substance were removed from the aqueous phase, and its levels were below the limit of quantification in all of the analyzed sludge samples. In contrast, clotrimazole, ketoconazole and econazole were present in all of the sludge samples, at concentrations ranging between 200 and 1000 microg kg(-1), dry weight. There were close correlations between the national measured and predicted antimycotic mass flows. Antimycotic fate analysis, based on sales figures, indicated that 53% of the total amount of fluconazole sold appeared in the final effluents of the STPs, while 1, 155, 35, 209 and 41% of the terbinafine, clotrimazole, ketoconazole, econazole and miconazole sold appeared in the digested dewatered sludge.

Development and validation of a method for quantitative determination of econazole nitrate in cream formulation by capillary zone electrophoresis.

A simple, fast, inexpensive and reliable capillary zone electrophoresis (CZE) method for the determination of econazole nitrate in cream formulations has been developed and validated. Optimum conditions comprised a pH 2.5 phosphate buffer at 20 mmol L(-1) concentration, +30 kV applied voltage in a 31.5 cm x 50 microm I.D. capillary. Direct UV detection at 200 nm led to an adequate sensitivity without interference from sample excipients. A single extraction step of the cream sample in hydrochloric acid was performed prior to injection. Imidazole (100 microg mL(-1)) was used as internal standard. Econazole nitrate migrates in approximately 1.2 min. The analytical curve presented a coefficient of correlation of 0.9995. Detection and quantitation limits were 1.85 and 5.62 microg mL(-1), respectively. Excellent accuracy and precision were obtained. Recoveries varied from 98.1 to 102.5% and intra- and inter-day precisions, calculated as relative standard deviation (RSD), were better than 2.0%. The proposed CZE method presented advantageous performance characteristics and it can be considered suitable for the quality control of econazole nitrate cream formulations.

Near-infrared spectrometry for the quantification of dermal absorption of econazole nitrate and 4-cyanophenol.

PURPOSE: The purpose of this study was to demonstrate the utility of near-infrared (NIR) spectroscopy for the in vitro quantification of econazole nitrate (EN) and 4-cyanophenol (4-CP) in hairless guinea pig skin. METHODS: NIR spectra were collected from each of the following: EN and 4-CP powders, EN and 4-CP in solution, and skin samples following topical exposure to either 4-CP in water or EN in propylene glycol and topical creams. To predict drug concentration from NIR spectra, principal component regression (PCR), interval PCR, and uninformative variable elimination PCR were each used with a leave-one-out cross-validation, and results were compared. NIR results were validated against known skin concentrations measured by high-pressure liquid chromatography (HPLC) analysis of solvent extracts. RESULTS: NIR results matched the HPLC results for the quantification of 4-CP and EN in skin exposed to saturated solutions and topical creams with an r2 > 0.90, a standard error of estimation < 7.0%, and a standard error of performance < 8.0%. CONCLUSION: This experiment demonstrated that NIR closely parallels results obtained from tissue extraction and HPLC analysis, proving its potential utility for the rapid and noninvasive determination of topical bioavailability/bioequivalence of EN and quantification of the model chemical 4-CP. Investigation of drugs in human skin is now justified.

Comparative study of the enantiomeric resolution of chiral antifungal drugs econazole, miconazole and sulconazole by HPLC on various cellulose chiral columns in normal phase mode.

The chiral resolution of (+/-)-econazole, (+/-)-miconazole and (+/-)-sulconazole on the columns containing different cellulose derivatives namely Chiralcel OD, OJ, OB, OK, OC and OF in normal phase mode has been described. The mobile phase used was hexane-2-propanol-diethylamine (425:74:1, v/v/v). The flow rates of the mobile phase used were 0.50, 1.00 and 1.50 ml/min. The values of the separation factor (alpha) of the resolved enantiomers of econazole, miconazole and sulconazole on chiral phases were ranged from 1.07 to 2.50 while the values of resolution factor (R(s)) varied from 0.17 to 3.90. The chiral recognition mechanisms between the analytes and the chiral selectors are discussed.

Comparison of the chiral resolution of econazole, miconazole, and sulconazole by HPLC using normal-phase amylose CSPs.

Resolution of the enantiomers of (+/-)-econazole, (+/-)-miconazole, and (+/-)-sulconazole has been achieved on different normal-phase chiral amylose columns, Chi-ralpak AD, AS, and AR. The mobile phase used was hexane-2-propanol-diethylamine, 400:99:1 (v/v). The flow rates of the mobile phase used were 0.50 and 1.00 mL min(-1). The alpha values for the resolved enantiomers of econazole, miconazole, and sulconazole on the chiral phases were in the range 1.63 to 1.04; the Rs values varied from 5.68 to 0.32.

On-line post-column photochemical derivatization in liquid chromatographic--diode-array detection analysis of binary drug mixtures.

HPLC methods were developed for the analysis of pharmaceutical creams containing binary drug mixtures (betamethasone valerate-chlorocresol; hydrocortisone-miconazole nitrate; desonide pivalate-chlorhexidine; dexamethasone-clotrimazole; triamcinolone acetonide-econazole nitrate). The chromatographic separations were performed on C-18 and cyano columns under reversed-phase conditions. A post-column on-line photochemical reactor (irradiation at 254 nm) was arranged between the analytical column and the diode-array detector to enhance the performance of the method. Two UV spectra (photoreactor on and off) were obtained for each analyte and these additional sources of information proved to be useful for the unambiguous identification of the various analytes. The method was applied to the quality control of commercial creams using a solid-phase extraction procedure for the sample clean-up.

Analysis of miconazole and econazole in pharmaceutical formulations by derivative UV spectroscopy and liquid chromatography (HPLC).

Methods based on derivative UV spectrophotometry and high-performance liquid chromatography (HPLC) have been developed for the selective determination of miconazole and econazole in pharmaceutical dosage forms. A solid-phase extraction (SPE) procedure using a diol column gave quantitative drug extraction from formulated creams and provided purified sample solutions suitable for assay by the derivative UV spectrophotometric and HPLC methods. The proposed methods gave comparable accurate results, whereas a conventional UV spectrophotometric method was found to be seriously affected by excipients.

Stability indicating HPLC-method for the determination of econazole nitrate in cream and lotion formulations.

A simple, fast HPLC-method for the determination of econazole nitrate in cream (Pevaryl, Pevisone) and lotion formulations (based on polyethylenic oleic glycerides and mono/di-stearic esters of ethylene- and polyethylene glycol) is described. The method is stability indicating as well as linear (range 5-15 mg econazole nitrate/g) and shows a good recovery (98.7-100.2%) and a good reproducibility (cv less than 1%, n = 10). The chromatographic separation is achieved on a RP-18 column using methanol/aqueous ammoniumcarbonate solution/tetrahydrofurane as the mobile phase. Quantification of the chromatograms is done by internal standard method using peak areas.